CL200 Replacement CathLab X-Ray Tube
9.4 MHU replacement for Philips Allura Xper FD20 systems.
CL200 replacement CT tube
Cost Savings Over OEM
- White-Glove, Personalized Customer Service
- OEM Quality and Warranty
- 24/7 Product & Tech Support
- Made in the USA
A 9.4 MHU replacement for Philips Allura Xper FD20 systems.
The CL200 is a replacement CathLab x-ray tube intended for use as a component replacement in compatible scanners. It meets Chronos replacement specifications and must be installed by qualified field service personnel in accordance with the system OEM guidance and the tube Instructions for Use (IFU).
Key Benefits
High heat capacity: 9.4 MHU class tube suitable for heavy clinical throughput environments.
OEM fit & compatibility: Direct replacement for Philips Allura Xper FD20 model part numbers (Philips MRC200 0407).
One-year warranty: Standard 12-month manufacturer warranty (verify terms upon quote).
Tested to IFU requirements: Product packaged and shipped with IFU documentation and recommended installation/warm-up instructions.
Note: This product is a component replacement for CathLab scanners. It is not intended by the manufacturer to be marketed with claims of diagnostic benefit or to replace imaging system clinical protocols. Follow the IFU and the scanner OEM service instructions for installation, warm-up, and QA.
IMPORTANT NOTICE: International Shipping Notice and Disclaimer: Please note that the Chronos Imaging CL200 Cardiovascular Cathlab replacement tube is available exclusively for shipment to ultimate destinations and use outside the United States. In alignment with our mission to deliver world-class diagnostics and accessible healthcare everywhere, we are dedicated to empowering international providers with this technical breakthrough.
Key Benefits of the CL200
9.4 MHU heat capacity
Supports high patient throughput and extended scan cycles without overheating.
Rated performance per IFU; actual use should follow OEM operating limits.
Direct OEM fit
Installs seamlessly in Philips Allura Xper FD20 systems using Philips MRC200 0407 tubes.
Mechanical and electrical interfaces match OEM specifications; verify before installation.
Proven Reliability
Designed and tested for stable anode rotation, consistent exposure quality, and long service intervals.
Tube life depends on scan protocol and maintenance conditions.
Simplified service integration
Compatible with existing mounting hardware, cables, and cooling systems.
Reduces field installation time; requires qualified personnel.
12-month warranty
Provides confidence in component quality and manufacturing integrity.
Warranty coverage terms available upon quote.
OEM-equivalent documentation
Includes full Instructions for Use (IFU), safety guidance, and warm-up procedures.
Installation and calibration must follow IFU and OEM system requirements.
Traceable manufacturing
Each unit serialized for tracking, maintenance logging, and QA documentation.
Enables compliance with facility quality management systems.
Environmentally responsible packaging
Shock-protected, recyclable crate minimizes shipping risk.
Tube handling and disposal must follow IFU and regulatory guidelines.
Technical Specifications
Designed for precision, reliability, and ease of service, the CL200 delivers OEM-level compatibility for the Philips Allura Xper FD20 system platform.
Review the technical specifications below to confirm fitment and operating parameters before installation or ordering.
| Product Specifications | |
|---|---|
| Nominal Voltage | 125 kV (max) |
| Nominal Anode Input Power (Small focal spot) | 30 kW @ 1.0 sec |
| Nominal Anode Input Power (Large focal spot) | 65 kW @ 1.0 sec |
| Small Focal Spot (Nominal per IEC 60336:2020) | 0.4 IEC 60336: 2020 |
| Large Focal Spot (Nominal per IEC 60336:2020) | 0.7 IEC 60336: 2020 |
| Anode Heat Storage Capacity | 7.05 MJ (9.4 MHU) |
| Anode Material | TZM, W, Re |
| Anode Disk Diameter | 200 mm (7.9 in) |
| Anode Angle | 11.0° |
| Maximum Filament Operating Voltage and Current (Small focal spot) | 6.2 A |
| Maximum Filament Operating Voltage and Current (Large focal spot) | 6.0 A |
| X-Ray Tube Window Material | Ultem |
| Minimum Total Filtration (Al Equivalent) | 2.5 mm Al |
| Applicable Standards | IEC 60613, IEC 60522, IEC 60336, EN 0601-1-3, IEC 60878 |
Product Support & Contact
For more information about the CL200 CT X-ray tube contact:
Lighthouse Imaging Solutions LLC
940 N 2nd Ave.
St. Charles, IL 60174 USA
+1 (630) 715-7867
sam@lighthousehope.net
Chronos Imaging LLC
555 N. Commerce Street
Aurora, IL 60504
+1 (630) 296-9220
sales@chronosimaging.com
Contact Lighthouse Imaging Solutions
*All product names, logos, company names, and trademarks mentioned in this document, including but not limited to Koninklijke Philips N.V. and Chronos Imaging LLC, are the property of their respective owners. Reference to these products is for informational purposes only and does not imply any affiliation, sponsorship, endorsement, or recommendation by the trademark holders. Lighthouse Imaging Solutions, LLC and its affiliates disclaim any liability arising from the use of or reliance on such references.
