AU200 Replacement CT X-Ray Tube

High-Performance Diagnostics for Modern Radiology Clinics

AU200 replacement CT tube

Cost Savings Over OEM

  • White-Glove, Personalized Customer Service
  • OEM Quality and Warranty
  • 24/7 Product & Tech Support
  • Made in the USA

A 6.3 MHU replacement for BrightSpeed™, Discovery™ and LightSpeed™ systems, including GE Optima™ CT540.

Don’t let legacy constraints dictate your clinical outcomes. The AU200 delivers a 140 kV peak and 6.3 MHU anode heat capacity, providing the technical liberation your imaging system deserves.It meets Chronos replacement specifications and must be installed by qualified field service personnel in accordance with the CT system OEM guidance and the tube Instructions for Use (IFU).

The “Status Quo” in medical imaging is a budget drain. We understand the frustration of technical bottlenecks that stall patient care. The AU200 isn’t just a replacement; it’s a strategic upgrade. It replaces technical uncertainty with disruptive authority—delivering hospital-grade image quality without the high-cost grip of legacy OEM systems.

Key Technical Advantages

  • Precision Engineering: Dual focal spots (0.7 x 0.6 mm and 0.9 x 0.9 mm) ensure uncompromising clarity for critical diagnoses.

  • Thermal Resilience: With a 4.7 MJ (6.3 MHU) anode heat storage capacity, the AU200 is built for high-throughput environments where downtime is not an option.

  • Superior Material Science: Features a Beryllium window and a 200 mm (7.9 in) TZM-composition anode disk for optimized X-ray emission and heat dissipation.

  • Tested to IFU requirements: Product packaged and shipped with IFU documentation and recommended installation/warm-up instructions.

Note: This product is a component replacement for CT scanners. It is not intended by the manufacturer to be marketed with claims of diagnostic benefit or to replace imaging system clinical protocols. Follow the IFU and the scanner OEM service instructions for installation, warm-up, and QA.

Key Benefits of the AU200

6.3 MHU heat capacity

Supports high patient throughput and extended scan cycles without overheating.

Rated performance per IFU; actual use should follow OEM operating limits.

Direct OEM fit

Installs seamlessly in GE LightSpeed™ and Discovery™ systems using D3191T–D3199T tubes.

Mechanical and electrical interfaces match OEM specifications; verify before installation.

Proven Reliability

Designed and tested for stable anode rotation, consistent exposure quality, and long service intervals.

Tube life depends on scan protocol and maintenance conditions.

Simplified service integration

Compatible with existing mounting hardware, cables, and cooling systems.

Reduces field installation time; requires qualified personnel.

12-month warranty

Provides confidence in component quality and manufacturing integrity.

Warranty coverage terms available upon quote.

OEM-equivalent documentation

Includes full Instructions for Use (IFU), safety guidance, and warm-up procedures.

Installation and calibration must follow IFU and OEM system requirements.

Traceable manufacturing

Each unit serialized for tracking, maintenance logging, and QA documentation.

Enables compliance with facility quality management systems.

Environmentally responsible packaging

Shock-protected, recyclable crate minimizes shipping risk.

Tube handling and disposal must follow IFU and regulatory guidelines.

Technical Specifications

Designed for precision, reliability, and ease of service, the AU200 delivers OEM-level compatibility for a range of GE CT platforms.
Review the technical specifications below to confirm fitment and operating parameters before installation or ordering.

Product Specifications
Nominal Voltage140 kV (max)
Nominal Anode Input Power (Small focal spot)24 kW @ 1.0 sec
Nominal Anode Input Power (Large focal spot)53.2 kW @ 1.0 sec
Small Focal Spot (Nominal per IEC 60336:2005)0.7 x 0.6
Large Focal Spot (Nominal per IEC 60336:2005)0.9 x 0.9
Anode Heat Storage Capacity4.7 MJ (6.3 MHU)
Anode MaterialTZM, W, Re, Graphite
Anode Disk Diameter200 mm (7.9in)
Anode Angle7.0°
Maximum Filament Operating Voltage and Current (Small focal spot)8.1 V, 7.5 A
Maximum Filament Operating Voltage and Current (Large focal spot)11.4 V, 6.5 A
X-Ray Tube Window MaterialBeryllium
Minimum Inherent Filtration (Al Equivalent)<0.1 mm Al
Applicable StandardsIEC 60336, IEC 60522, IEC 60613, IEC 60878, EN 60601-1 EN 60601-1-3, EN 60601-2-28, UL 60601-1, IEC 14971 US FDA 21 CFR
Safety ClassificationFDA Class I, IEC 60601-2012 IB, 93/42/EEC IIB

AU200 Cross-reference table

OEM Scanner ModelOEM Tube Part Number(s)AU200 Validated for Replacement
BrightSpeed™ EdgeD3186T, D3189T, 2137130-5, 2137130-2, 2120785-2Yes
BrightSpeed™ EliteD3186T, D3189T, 2137130-5, 2137130-2, 2120785-2Yes
BrightSpeed™ ExcelD3186T, D3189T, 2137130-5, 2137130-2, 2120785-2Yes
Discovery™ NM/CT 670D3182T, D3185T, D3186T, D3189T, 2137130-5, 2137130-2, 2120785-2Yes
Discovery™ NM/CT 670 ProD3182T, D3185T, D3186T, D3189T, 2137130-5, 2137130-2, 2120785-2Yes
Discovery™ STD3182T, D3185T, D3186T, D3189T, 2137130-5, 2137130-2, 2120785-2Yes
Discovery™ STED3182T, D3185T, D3186T, D3189T, 2137130-5, 2137130-2, 2120785-2Yes
Discovery™ RXD3182T, D3185T, D3186T, D3189T, 2137130-5, 2137130-2, 2120785-2Yes
LightSpeed™ 16D3182T, D3185T, D3186T, D3189T, 2137130-5, 2137130-2, 2120785-2Yes
LightSpeed™ PlusD3182T, D3185T, D3186T, D3189T, 2137130-5, 2137130-2, 2120785-2Yes
LightSpeed™ UltraD3182T, D3185T, D3186T, D3189T, 2137130-5, 2137130-2, 2120785-2Yes
Optima™ CT540D3182T, D3185T, D3186T, D3189T, 2137130-5, 2137130-2, 2120785-2Yes

Product Support & Contact

For more information about the AU200 CT X-ray tube contact:

Lighthouse Imaging Solutions LLC
940 N 2nd Ave.
St. Charles, IL 60174 USA
+1 (630) 715-7867
sam@lighthousehope.net

Chronos Imaging LLC
555 N. Commerce Street
Aurora, IL 60504
+1 (630) 296-9220
sales@chronosimaging.com

Request a Quotation from Lighthouse Imaging Solutions

*All product names, logos, company names, and trademarks mentioned in this document, including but not limited to GE® and Chronos Imaging LLC, are the property of their respective owners. Reference to these products is for informational purposes only and does not imply any affiliation, sponsorship, endorsement, or recommendation by the trademark holders. Lighthouse Imaging Solutions, LLC and its affiliates disclaim any liability arising from the use of or reliance on such references.